Press ESC to close

How To Use The Rotary Extension For LaserPecker 4

This piece aims to guide you through using the Rotary Extension for the LaserPecker 4, a revolutionary laser engraving tool renowned for its precision and versatility. The presentation commences with a rundown of the essential components, proceeding to the assembly, and then explaining the stud grip component, among a multitude of features.

Throughout the lesson, you will understand how to effectively operate this add-on by learning the correct installation process of Single and Double Step Jaws, exploring alternative angle engraving, and comprehending reverse engraving. It’s a comprehensive primer that allows you to maximize the potential of the LaserPecker 4, bolstering your DIY projects with a potent mix of accuracy and creativity.

Click to view the How To Use The Rotary Extension For LaserPecker 4.

Understanding the Components of the Rotary Extension

Identifying the different parts

Begin with familiarizing yourself with the various parts that make up the rotary extension. This extends from the rotary base to the jaws, stud grips, and the secured buffer components. Each part plays a crucial role in the functionality of the extension.

Knowing the function of each component

Understanding the functionality of each component is equally important. For example, the rotary base aids in the consistent movement of the item being engraved while the jaws hold the item securely during the engraving process. The stud grip provides further support, ensuring that the item doesn’t slip. Understanding the function of each component will help in the assembly process and better utilization of the LaserPecker 4.

Assembling the Rotary Extension for LaserPecker 4

Guide to the assembly process

To assemble the rotary extension, start by attaching the rotary base to the main body. Then, fix the jaws onto the rotary base, ensuring they are firmly secured. If using the stud grip, attach it to the jaws to provide additional support for items that may be problematic to secure.

Safety precautions to keep in mind during assembly

Safety should always be prioritized when assembling the rotary extension. Ensure your workspace is clean and free from potential hazards. Always handle the components with care, avoiding any forceful pushing or pulling which could cause damage. Safety gloves and glasses can also provide protection during assembly.

Riser Add-on Assembly

Importance of the riser add-on

The riser add-on plays a crucial role by raising the level of the extension, providing a more suitable working height, and ensuring a secure fit for larger items. Its use provides versatility, enhancing the overall functionality of the rotary extension.

Step by step process for riser add-on assembly

The riser add-on fits between the rotary base and the laser engraver. Start by disconnecting the rotary base from the main body. Then, attach the riser add-on to the rotary base, ensuring it’s secured before reattaching the main body. The assembly should be tight, but be careful not to overtighten.

How To Use The Rotary Extension For LaserPecker 4

This image is property of

Learn more about the How To Use The Rotary Extension For LaserPecker 4 here.

Components and Port Overview

Explanation of each component

It’s crucial to understand what each component provides. The rotary base helps in the rotation of the item, the jaws secure the item in place, and the riser add-on helps to adjust the height of the engraving area as necessary. You should familiarize yourself with each part’s place and role for a successful assembly.

Understanding the port system

The port system allows the rotary extension for the LaserPecker 4 to interface with your device. In most cases, the connection is via USB, offering reliable power supply and controlled rotation speed. This functionality emphasizes the importance of noting the location and use of each port.

Installation and Demo of Single Step Jaws

Instructions for installation

To install the single step jaws, place them on the rotary base and secure them with the provided screws. Ensure the jaw grip faces upward and the line on the jaw aligns with the mark on the rotary base for precise engraving.

Demonstration and usage of the single step jaws

After installation, place the engraving item between the jaws and rotate them until the item is securely held. Perform a test run to ensure the grip is firm, and consistent movement is achieved.

Installation and Demo of Double Step Jaws

How to install the double step jaws

Installing the double step jaws follows a similar process to the single step jaws. The main difference is the additional jaw which allows for greater versatility, enabling you to engrave irregularly shaped or larger items.

Practical demonstration of the double step jaws

Demonstrating the double step jaws involves securing a larger or oddly-shaped item. Rotate the jaws until the item is firmly held, then perform a test run to ensure dependable grip and consistent rotary movement.

Utilizing the Stud Grip Component

Introduction to the stud grip component

The stud grip component provides an additional layer of security for items that may be challenging to secure into the jaws directly. With its utilization, you can efficiently work with a wider variety of items.

Guide for using the stud grip efficiently

To use the stud grip, first secure it on the jaws of the rotary extension, then place the engraving item against the stud grip. Ensure the grip is tight and firm, preventing possible slippage during engraving.

Approaching Alternative Angle Engraving

Understanding alternative angle engraving

Alternative angle engraving allows you to engrave at different angles, enhancing the overall design and depth of your work. By tilting the LaserPecker 4, you can achieve unique engraving styles and designs.

Tips for successful alternative angle engraving

Before you proceed with alternative angle engraving, always ensure that your setup is stable and secure. Carefully adjust the LaserPecker 4 to the desired angle and perform a test run to make sure that the angle doesn’t interfere with the engraving process.

Reverse Engraving with LaserPecker 4

Definition of reverse engraving

Reverse engraving means creating designs in a mirror-image format. It’s often used on transparent materials, where the design can be viewed from both sides. This feature requires mindful adjustments that are supported by the LaserPecker 4.

Method to achieve reverse engraving

To execute reverse engraving, adjust your design artwork to a mirror-image format before beginning. Then, secure your engraving item and ensure LaserPecker 4 is in the correct alignment. Making sure the alignment is accurate will prove crucial to achieving a successful reverse engrave.


Review of the article

This article has provided an in-depth review of the rotary extension for LaserPecker 4. It has addressed the components, their assembly, and their functionality. You now should have a better understanding of how the single step jaws, double step jaws, stud grip component, and reverse engraving work. You’ve also learned the precautions needed while performing an assembly, and how to approach alternative angle engraving.

Final thoughts on the use of the rotary extension for LaserPecker 4

Utilizing the rotary extension for LaserPecker 4 can take your engraving to a new level. With a heightened understanding of the system and its components, you are now better equipped to gain maximum benefit from your rotary extension and deliver unique, professional-grade engraving.

Get your own How To Use The Rotary Extension For LaserPecker 4 today.